Nlynx 3 Slot User Manual

3 slot Gigabit Chassis switch User Guide Rev

6 Rear Panel The 3-pronged power plug, 2 fans, power switching is located at the rear panel of the 3-slot Gigabit Chassis switch

7 A. Position one bracket to align with the holes on one side of the switch and secure it with the smaller

8 3. Network Application This section provides you a few samples of network topology in which the switch is used. In general, the 3-slot Gigabit Ch

9 4. Troubleshooting This section is intended to help you solve the most common problems on the 3-slot Gig

10 at any time. Data path loops will cause broadcast storms that will severely impact your network performance. Diagnosing LED Indicators

11 5. Technical Specification This section provides the specifications of the 3-slot Gigabit Chassis switc

12 cable EIA/TIA 568 100Ohm(100M) Expansion module 8port Gigabit TX module 8 port Gigabit SX (SC) 8 Port Gigabit LX (SC) module 8 MINI GBIC module 4

Contents 1. INTRODUCTION ...1 Features ...

1 1. Introduction The 3-slot Gigabit Chassis switch is a modular Switch that can be used to build high-performance switched workgroup networks. This

2  19 inch Rack mount design Package Contents Unpack the contents of the 3-slot Gigabit Chassis switch and verify them against

3 eliminated congestion problems inherent with CSMA/CD (Carrier Sense multiple access with Collision Detecti

4 2. Hardware Description This Section mainly describes the hardware of the 3-slot Gigabit Chassis switch, and gives a physical and functional over

5  System LED Status Description Green Power On Power Off Power is not connected  Gigabit Copper Modul